SD> Stuff for sale- round 2!

[Matthew Green]

1st and foremost-

I have an AWESOME set of wheels-  They are 15x8 Revolution 3-piece race 
wheels.  They are pretty light, and they are the proper offset to fit 
ALL turbo Dodges, even L-bodies!  (but you will have to roll the fender 
lips in the rear or they might rub if you hit bumps...).  These wheels 
are a thick five-spoke pattern with silver painted spokes.  They are 
currently wearing Toyo race tires (but the tires are dead).  I will NOT 
remove the tires however, because if I ship them, the tires will help 
protect them (trust me, it's worth the extra shipping cost).  I would 
assume shipping to run anywhere from $50 to $150 depending on where they go.
I am asking $800 for the set.  They were almost double that new, if you 
could get them anymore, which you can't...

This is what they look like roughly, but they are 3 piece so they have 
bolts running around the circumference inside the rim.
http://www.sspmotorsports.com/sale15x9rfxa.JPG


Other new things I've come across now for sale-

T2 turbo- ran fine when on car, but feels a little, um, wiggly.  has 2.5 
wastegate housing- $100

Brand new Energy Suspension poly bushings for L-body front a-arms.- $20

Flexi- airbox to turbo hose with MONSTER air filter on it (12" long, 6" 
diameter to 5" diameter cone)- $25

Smooth airbox to turbo hose with shrouded filter (small cone with 
plastic cover- good for cold air/ ram air setup)- $25

Ported T2 exhaust manifold- missing one turbo stud (hole stripped) but 
worked fine for me with only 3- $50

Late silver TURBO valvecover with 1-piece gasket- $40

Late black TURBO valvecover with 1-piece gasket- $50

Old stuff still for sale-

Bottom end stuff-
Early T2 block- $50 (may even be a free gift if you buy something and 
pick it up!)
*Lightened* and knife edged forged crank for early block- $250
NEW .020 over Venolia forged pistons w/ pins- $350
T2 rods- need redone- come with NEW ARP bolts- $100
Windage tray oil pan- custom made- $150

Also have LOTS of misc bolts, pulleys, housings, etc.  Contact me with 
needs.

Late t1 head setups- very used- with manifolds and turbos- make offers

Full cage for 2dr L-body- bolt-in SCCA legal with door bars- $500

T3 complete engine with knock- $700

I'm sure there will be more...